DRYLASTIC

DRYLASTIC is a two-component liquid membrane, based on binders, micronized cements modified with special synthetic polymers in aqueous dispersion, and selected fine-grain aggregates. Thanks to the use of special synthetic resins, the hardened layer of DRYLASTIC remains stably and constantly elastic in all environmental conditions and does not suffer chemical attack from de-icing salts, sulfates, chlorides, and carbon dioxide. DRYLASTIC is suitable for protecting areas of potential cracking. Its excellent initial and final adhesion capacity allows application on vertical and horizontal surfaces. It adheres to concrete surfaces, masonry, and plasters as long as they are solid and adequately cleaned. It also adheres to marble, ceramic, and sheaths if properly primed. It is not a decorative material, but ensures waterproofing of cracks and fissures.

• Long-lasting elastic waterproofing barrier

• Resistant to chemical aggression from de-icing salts, seawater, sulfates.

• Protects against carbon dioxide penetration.

• Resistant to UV rays, pending further coatings

• Elastic at both low and high temperatures

• Vapor-permeable.

• No long maturation times required.

• Suitable for contact with potable water (Legislative Decree 31/2001).

The B component of DRYLASTIC does not contain APEO (Alkyl phenol ethoxylate), nor formaldehyde, nor ammonia, nor VOCs, and does not generate dust during mixing, thus safeguarding the health of applicators.

Waterproofing of concrete tanks for water containment, waterproofing of bathrooms, showers, balconies, reservoirs, terraces, swimming pools, etc. before laying ceramic tiles, waterproofing of curved or variable geometry surfaces, waterproofing of old tiles before laying a new covering, flexible coating of cement structures, even those damaged due to plastic or hydraulic shrinkage or subject to flexural deformation, protective and anti-carbonation coating.

DRYLASTIC is easy to apply, has a high crack bridging capacity, creating a waterproof coating,even without the use of mesh (for surfaces up to 15 m2)

The high adhesion capacity of DRYLASTIC allows its application to almost any type of substrate such as concrete, cement mortar, stone, ceramic, brick and wood.

DRYLASTIC is a cohesive product that allows vertical interventions without the need to provide special spreading techniques (hard bristle brush).